How To Make Flying Geese 4 At A Time

Y'all are here: Dwelling house / Tutorials / 4 at a Time Flying Geese Tutorial – Tips, Tricks and Directional Prints

I accept a four at a time flying geese tutorial to share with y'all today! If you have never tried flight geese four at a time, it's pretty clever! When you make flying geese four at a time, they get together overnice and fast and have no waste material!

When you make flying geese one at a time you snowball the corners and end up discarding the cut off corner. Well judge what… with four a time flying geese, there are no discarded corners! In that location is absolutely no wasted fabric when making flying geese 4 at a time.

I like making flight geese iv a time whenever possible since they exercise go together dainty and fast and utilise up all of that textile.

This mail service will walk y'all through making flight geese four at a time. Plus I'll add some tips and tricks and directional print instructions.

Computing Four at a time flight geese

At that place is a uncomplicated mode to summate the squares needed for four at a time flying geese:

Add i-one/4″ to the finished width [x1]

Add 7/8″ to the finished meridian [x4]

Flying geese are always twice as wide as they are high. And then if you lot need a ii″ x 4″ finished flying geese then the math looks like this: 2″ + seven/8″ = 2-7/8″ (4 squares), iv″ + 1-1/4″ = 5-1/4″ (1 foursquare)

The larger square is the "geese" and the smaller squares become the "sky" or the side triangles.

This calculation makes exact sizes. They should finish at the exact size and not need whatsoever trimming. (*should* being the primal word. haha. See additional tips and tricks beneath!)

Iv at a time flying geese chart

With 4 at time flying geese you will need 1 larger square and 4 smaller squares.

Footstep past step instructions for four at a time flying geese

1. Gather your squares together. I large square plus four smaller squares.
   Directional prints: Large square should exist facing upward. Small squares should also both exist facing up.
2. Marker a line on the diagonal of the wrong side of two small squares (prints are facing upwardly).

• 

• 

• 

3. Line the smaller squares up as shown below. The line should be perfectly straight. That ensures your corners are as well lined up.
4. Pin in place.
5. Sew a scant i/4″ on each side of the marked line.

• 

• 

6. Cut on the marked line using a rotary cutter.
7. Flip corners open and printing. You will stop up with two eye shapes as shown.

• 

• 

• 

8. At present information technology's time to add the last 2 smaller squares. They volition exist placed sideways when using directional prints. You can make sure they are the correct management by flipping open. Are your prints going in the aforementioned management? (Similar photo ii beneath). If not, rotate ninety degrees. Check again.
9. When your directional impress is in the correct direction, mark a line on the diagonal.

• 

• 

• 

10. Sew a scant ane/4″ on each side of the marked line.
11. Cut on the marked line using a rotary cutter.

12. Press corners open.

You lot now accept four perfectly sized flying geese! (Well maybe. I never take perfectly sized flight geese…haha).

Equally you can meet you volition cease upward with your directional prints going in 2 different directions. If you are using a truthful directional print that is vertical your prints may finish upwards sideways depending on the flying geese quilt pattern you are using.

Flying Geese iv a time tips and tricks

Unless you have perfected your 1/4″ seam and are a perfectly precise cutter you lot may observe your flight geese are not coming out to the exact size. Here are some tips and tricks for amend four at a fourth dimension flying geese:

1. Utilise a scant ane/four″ seam allowance. A scant ane/iv″ seam is a smidge nether i/4″. The scant 1/4″ seam is going to be crucial when making flight geese four at a time. A scant one/iv″ seam allows for a piffling actress room for thread thickness and flipping your corners open.
2. Cut your squares a little bigger and and so trim to size if needed. Try adding i/eight″ to the smaller squares or calculation 1/eight″ to both the larger and the smaller squares. Or fifty-fifty ane/4″ actress to both squares. This should produce a larger flight geese that you can and so trim perfectly to size. I personally accept fashion more luck with my four at a fourth dimension flying geese when I make them a tiny bit bigger like this.
3. Pull your smaller squares in a few threads from the corners. I simply learned this trick from a quilter on Instagram and information technology sure is helpful! This lone may be just the pull a fast one on you need to size out your four at a fourth dimension flying geese. This actually helps ensure you accept a good 1/4″ allowance between your triangle acme and top border.

• 

• 

4. Use flying geese quilt rulers. I personally haven't used speciality flight geese rulers but quilters love them! Ii that I've heard a lot of good things about are Bloc Loc rulers and Fly Clipper rulers.
5. Cut accurately. Information technology's all going to come dorsum to your cutting skills with no waste material four at a time flying geese. Take your time to cutting those squares perfectly sized and perfectly squared.

Trimming Flying Geese

If yous made your four at a fourth dimension flying geese a lilliputian too big and so you will need to trim to size. When I add 1/viii″ to my squares it results in the tiniest fleck of trimming. Just enough to straighten the top edge.

Ideally, you will want to end upwardly with a nice straight edge along the top of each flight geese. Yous can try to straighten out that line during the pressing stage. And then instead of simply pressing fully open and getting wonky edges, you lot might eyeball it into a straight line. That might mean your seam has a little more fold in information technology.

When trimming your flight geese you want to make sure you preserve one/4″ between the triangle peak and the pinnacle edge. I always starting time by trimming that top edge for that reason.

1. Start by trimming the top edge and the correct side of the flight geese with a ruler that is bigger than the flying geese. As I'thousand trimming the top edge, I'thou making sure I can also trim a tiny fleck off the bottom and still have the perfect height.
2. Flip and then finish by trimming your flying geese to the exact size. Both of your bottom seams should perfectly get through the corners. If your ruler has a 45 degree line on information technology you tin can use that as a guide when cut. You tin see how the 45 degree line goes perfectly on the seam in the 3rd photo.

• 

• 

• 

• 

I promise these tips and tricks help you lot to improve size out your flying geese 4 at a time! And if you accept never made flying geese four at a time they really are a fun and clever way to brand them.

Bank check out these flight geese quilt patterns:

PATCHWORK Flight GEESE
FLYING

• 

  PATCHWORK Flying GEESE

• 

  FLYING

Reader Interactions

Source: https://www.quiltylove.com/four-at-a-time-flying-geese-tutorial-tips-directional-prints/

Share this post